Natural and Waste Materials for Desulfurization of Gaseous Fuels and Petroleum Products
Natural and Waste Materials for Desulfurization of Gaseous Fuels and Petroleum Products
Blog Article
Currently, the key challenge of the oil-refining industry worldwide is to produce environmentally friendly fuel in large volumes to meet market demand, which is due to strict environmental standards governing the permissible sulfur content in fuel.Natural gas, refinery gas, and coal gas contain acid gases such as hydrogen sulfide and carbon dioxide.These compounds must be removed from the gas stream because of the toxicity of H2S and to prevent the acid gas-induced corrosion of pipelines and facilities.Hydrogen sulfide is released as a result of various industrial processes, and its removal is critical because this compound can cause corrosion and environmental damage even at low concentrations.
Sulfur compounds are also present in natural gas, biofuels and other fuel gases used dea eyewear in power plants.This article proposes new adsorbents of natural and waste origin and presents the results of their testing for the removal of acid gases.This paper also considers methods for the preparation of adsorbents from waste and procedures for the removal of sulfur-containing compounds.Using agricultural, industrial waste to produce activated sorbents not only solves the problem of waste disposal but also reduces the wella color touch 77 45 cost of desulfurization, contributing to the creation of sustainable and environmentally friendly technologies.
The Review Section comprehensively summarizes current research on hydrogen sulfide removal in gas cleaning processes using agricultural and industrial waste as highly efficient adsorbents.In the Experimental Section, 10 composite materials based on natural raw materials and wastes, as well as 6 commercial adsorbents, were synthesized and tested under laboratory conditions.The choice of materials for the adsorbent production was based on the principles of environmental friendliness, availability, and cost-effectiveness.The developed materials based on modified sludge from water treatment plants of thermal power plants are effective sorbents for the purification of gas emissions from petrochemical enterprises.
For industrial use, it is necessary to solve the problems of increasing the economic attractiveness of sorbents from waste, the ability of regeneration, the competitive adsorption of pollutants, the use of indicator sorbents, the optimization of operating conditions, and safe waste disposal.